A dirty obstructed or damaged track can make a sliding closet door jump off its track.
Sliding closet door off track.
While holding the door up pull it 4 8 in 10 20 cm towards you and then lower the door to the floor.
Bypass doors have a metal track screwed inside the top of the doorframe.
Wiggle the door until the pivot snaps into the hole.
Inspect the rollers and tighten them with a.
Once this is complete repeat the process with the inside closet door.
Once secure release the door.
Take one of the doors down by lifting it and angling the bottom toward you until the rollers clear the top track then pulling it toward you.
If one side of your door is loose then it s most likely that a wheel or wheel brace is faulty.
Remove the outside closet door by first sliding the door to the center of the track.
Hold down the spring loaded guide on the opposite side of the other door panel and swing the door until the guide is under the track.
If grime remains try wiping it up with a mild cleaner and a cloth.
Find sliding closet door tracks track kits at lowe s today.
Pull the bottom of the door out towards you and set it down off of the track.
Place a blanket or rug onto the floor and lay the door onto it for a safe spot.
Your sliding closet doors may have tracks secured to the floor and be guided by a top rail.
The door may come completely off when you go to lower it.
Next carefully lift the door up at a slight angle to remove the bottom rollers from the track.
The track has two channels that guide rollers that are attached to the top of each door that allow the doors to slide.
To fix this issue first try vacuuming up debris and grime from the track with a crevice attachment.
Then angle the door towards you and pull gently detaching the door from its top track.
Take a look and ensure the entire wheel is in one piece and properly seated in the track.
Then wipe it with a damp rag.
Sliding closet doors fall off tracks.
Once the door is approximately under the hole in the track release the pivot.