Sikkens Cetol Door And Window Sanding Before Final Coat

Apply final coat and reattach hardware photo by kit latham.

Sikkens cetol door and window sanding before final coat.

After sanding the door it was refinished with a base coat of sikkens cetol 1. Re sanding may be necessary. Clean tools with mineral spirits. Let surface dry for minimum of 24 hours 6.

Application do s for cetol i and cetol 23 plus apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir before using saturate all end grains nail holes cavities and. Working with cetol door window preparation procedures new weathered uncoated wood sand door and window surfaces with 80 120 grit sandpaper prior to application of cetol door window. Apply in the direction of the grain. Available as a clear satin clear gloss or 4 ready mix colors in satin.

However an alternate to sanding for preparation is listed below. Old damaged coatings must be completely removed before application of cetol door window. Let surface dry a minimum of 24 hours. Apply second coat of cetol door window 5.

Dries to recoat in 24 hours additional coat may increase these times. Apply 2nd coat of cetol door window 5. After the finish has dried overnight gently hand sand it with 220 grit paper. Apply a second coat of cetol i.

This process was repeated once more before applying the final coat of. Let surface dry for minimum of 24 hours 6. Working with cetol door window application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using do not apply in direct sunlight saturate all end grains nail holes and cracks in the wood. Apply a third coat of door window wood finish.

Brush on the second coat following the same order and let it dry overnight. Let surface dry for minimum of 24 hours 4. Sikkens proluxe cetol door and window is a premium translucent exterior stain whose alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas. It is always recommended to perform a three 3 coat color and sheen test sample of the wood.

In order to restore this home s front door to its original condition our team at monk s completely stripped the door and sanded it to the bare wood. Coat all sides of door. Apply a third coat of cetol i. A more resilient alternative to exterior varnishes and polyurethanes.

Apply one coat of cetol door window. You don t want to sand through to bare wood dust the door and wipe it down with a tack cloth. Wait 7 days before using furniture. Apply 1st coat of cetol door window 3.

Application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using saturate all end grains nail holes and cracks in the wood. Clean tools with paint thinner or mineral spirits maintenance procedures proper maintenance starts with visual inspection. Apply 3rd coat of cetol door window 7. The best method to prepare vertical wood surfaces is to sand with 80 120 grit sandpaper.

Clean tools with mineral spirits. Apply third coat of cetol door window 7. Then the door was lightly sanded and cleaned again before applying a coat of sikkens cetol 23.